ISO/DIS 13060
Abstract
This document describes a method for measuring adhesion strength between microcircuits and substrates by scratching with the wedged-shape diamond stylus. Using the traditional adhesion test, it is difficult to evaluate the adhesion strength of the microcircuits with a narrower scratching stylus. During the test, applying stylus force is constant or progressive and normal to the surface. This yields adhesive and/or cohesive failures of the microcircuit coating-substrate system. This test method is suitable for evaluating copper microcircuits up to a width of tens of micrometres. It might also be ideal for evaluating fine patterns of other widths and materials. This International Standard intends to use in the macro force range (0.1 N to 30 N). Although the proposed procedure may apply to other force ranges, an appropriate calibration is required to quantify the normal forces at which failures occur.
General information
-
Status: Under development
You can help develop this draft international standard by contacting your national member
Stage: DIS ballot initiated: 12 weeks [40.20] -
Edition: 1Number of pages: 14
-
Technical Committee :ISO/TC 107/SC 3
- RSS updates
