ISO 1436:2020
2020-06
Abstract
This document specifies requirements for six types of wire-braid-reinforced hoses and hose assemblies of nominal size from 5 to 51. This document also specifies the hose of nominal size 63 for types 2SN and R2AT, and the hose of nominal size 76 for type 2SN.
They are suitable for use with:
— oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures ranging from −40 °C to +100 °C;
— water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temperatures ranging from −40 °C to +70 °C;
— water at temperatures ranging from 0 °C to +70 °C.
This document does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies.
NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.
General information
-
Status: PublishedPublication date: 2020-06Stage: International Standard to be revised [90.92]
-
Edition: 6Number of pages: 13
-
Technical Committee :ISO/TC 45/SC 1
- RSS updates
Next version under development
ISO/DIS 1436
ISO/DIS 1436
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
Life cycle
-
Previously
WithdrawnISO 1436:2017
-
Now
-
Will be replaced by
Under developmentISO/DIS 1436
