ISO 1853:2011
Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
Reference number
ISO 1853:2011
Edition 3
2011-08
Withdrawn
ISO 1853:2011
53024
Withdrawn (Edition 3, 2011)

Abstract

ISO 1853:2011 specifies the requirements for the laboratory testing of the volume resistivity of specially prepared test pieces of vulcanized or thermoplastic rubber compounds rendered conducting or dissipative by the inclusion of carbon black or ionizable materials. The tests are suitable for materials with a resistivity of less than about 108 ohm metres.

Method 1 is the preferred method when test pieces with bonded electrodes are not available.

Method 2 is the preferred method when test pieces are moulded with the inclusion of bonded electrodes.

Method 3 may be used if methods 1 and 2 are not suitable, but it has lower accuracy.

General information

  •  : Withdrawn
     : 2011-08
    : Withdrawal of International Standard [95.99]
  •  : 3
     : 10
  • ISO/TC 45/SC 2
    83.060 
  • RSS updates

Got a question?

Check out our FAQs

Customer care
+41 22 749 08 88

Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)