Reference number
ISO 2493-2:2011
© ISO 2025
ISO 2493-2:2011
Paper and board — Determination of bending resistance — Part 2: Taber-type tester
Edition 1
2011-11
Withdrawn
Withdrawn (Edition 1, 2011)

Abstract

ISO 2493-2:2011 specifies procedures to measure the bending resistance of paper and paperboard.

ISO 2493-2:2011 is used to determine the bending moment required to deflect the free end of a 38 mm wide vertically clamped specimen by 15° when the load is applied at a bending length of 50 mm. For boards that tend to be permanently deformed if bent through 15°, the half bending angle, i.e. 7,5°, can be used. The bending resistance is expressed in terms of the bending moment and parameters set by the manufacturer of the Taber-type tester.

The method is primarily used for papers with a high grammage.

General information

  • Status
     : Withdrawn
    Publication date
     : 2011-11
    Stage
    : Withdrawal of International Standard [95.99]
  • Edition
     : 1
    Number of pages
     : 9
  • Technical Committee :
    ISO/TC 6/SC 2
    ICS :
    85.060 
  • RSS updates

Life cycle

Got a question?

Check out our Help and Support

  2. Store
  3. Store
  4. ICS
  5. 85
  6. 85.060
  7. ISO 2493-2:2011