Reference number
ISO 16063-21:2003
© ISO 2024
International Standard
ISO 16063-21:2003
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer
Edition 1
2003-08
Read sample
Published (Edition 1, 2003)
This publication was last reviewed and confirmed in 2019. Therefore this version remains current.
This standard has 2 amendments.

ISO 16063-21:2003

Language
Format
CHF 151
Convert Swiss francs (CHF) to your currency

Abstract

ISO 16063-21:2003 describes the calibration of rectilinear vibration transducers by comparison. Although it mainly describes calibration using direct comparison to a standard calibrated by primary methods, the methods described can be applied between other levels in the calibration hierarchy.

ISO 16063-21:2003 specifies procedures for performing calibrations of rectilinear vibration transducers by comparison in the frequency range from 0,4 Hz to 10 kHz. It is primarily intended for those who are required to meet ISO standardized methods for the measurement of vibration under laboratory conditions, where the uncertainty of measurement is relatively small. It can also be used under field conditions, where the uncertainty of measurement may be relatively large.

From knowledge of all significant sources of uncertainty affecting the calibration, the expanded uncertainty can be evaluated using the methods given in ISO 16063-21. It also covers the assessment of uncertainties for calibrations performed using a check standard.

This document is applicable to calibrations outside the frequency range from 0,4 Hz to 10 kHz, considering the additional facts described in 4.3. Systems have been demonstrated to cover the range from 0,01 Hz to 30 kHz.

General information

  • Status
     : Published
    Publication date
     : 2003-08
    Stage
    : Close of review [90.60]
  • Edition
     : 1
    Number of pages
     : 29
  • Technical Committee :
    ISO/TC 108
    ICS :
    17.160 
  • RSS updates

 Amendments

Amendments are issued when it is found that new material may need to be added to an existing standardization document. They may also include editorial or technical corrections to be applied to the existing document.

Amendment 1

Edition 2016

Language
Format
CHF 18
Convert Swiss francs (CHF) to your currency

Amendment 2

Edition 2024

Language
Format
CHF 18
Convert Swiss francs (CHF) to your currency

Life cycle

Sustainable Development Goals

This standard contributes to the following Sustainable Development Goals

4
Quality Education
9
Industry, Innovation and Infrastructure

Got a question?

Check out our Help and Support

  2. Store
  3. Standards catalogue
  4. ICS
  5. 17
  6. 17.160
  7. ISO 16063-21:2003