Filter :
Standard and/or project Stage TC
Round punches with 60 degrees conical head and straight shank
95.99 ISO/TC 29/SC 8
Tools for pressing — Round punches with 60 degrees conical head and straight shank
90.60 ISO/TC 29/SC 8
Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools, jigs and fixtures
95.99 ISO/TC 29/SC 8
Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools
90.93 ISO/TC 29/SC 8
Machined plates for press tools, moulds, jigs and fixtures — Nominal dimensions
95.99 ISO/TC 29/SC 8
Open front mechanical power presses — Capacity ratings and dimensions
90.93 ISO/TC 39
Acceptance conditions of open front mechanical power presses — Testing of the accuracy
90.93 ISO/TC 39
Punches with cylindrical head and reduced shank
95.99 ISO/TC 29/SC 8
Tools for pressing — Punches with cylindrical head and reduced shank
95.99 ISO/TC 29/SC 8
Tools for pressing — Punches with cylindrical head and straight or reduced shank
90.93 ISO/TC 29/SC 8
Round punches with cylindrical head and straight shank
95.99 ISO/TC 29/SC 8
Open front mechanical power presses — Vocabulary
90.60 ISO/TC 39
Tools for pressing — Punches — Nomenclature and terminology
95.99 ISO/TC 29/SC 8
Tools for pressing — Punches — Nomenclature and terminology
90.93 ISO/TC 29/SC 8
Tools for pressing — Round matrixes
95.99 ISO/TC 29/SC 8
Tools for pressing — Matrixes
90.93 ISO/TC 29/SC 8
Tools for pressing — Guides for round punches
95.99 ISO/TC 29/SC 8
Tools for pressing — Round punches with 60 degrees conical head and reduced shank
95.99 ISO/TC 29/SC 8
Tools for pressing — Round punches with 60 degrees conical head and reduced shank
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 1: Types
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 1: Types
90.92 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 1: Types
40.60 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
90.92 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
40.60 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
90.92 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
40.60 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
90.92 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
40.60 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
90.92 ISO/TC 29/SC 8
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
40.60 ISO/TC 29/SC 8
Tools for pressing — Wear plates for press dies — Part 1: Type A
95.99 ISO/TC 29/SC 8
Tools for pressing — Wear plates for press dies — Part 1: Type A
90.93 ISO/TC 29/SC 8
Tools for pressing — Wear plates for press dies — Part 2: Type B
95.99 ISO/TC 29/SC 8
Tools for pressing — Wear plates for press dies — Part 2: Type B
90.93 ISO/TC 29/SC 8
Machine tools — Straight-sided single-action mechanical power presses from 400 kN up to and including 4 000 kN nominal force — Characteristics and dimensions
90.60 ISO/TC 39
Machine tools — Straight-sided high-speed mechanical power presses from 250 kN up to and including 4 000 kN nominal force — Characteristics and dimensions
90.60 ISO/TC 39
Tools for pressing — Guide bushes — Part 1: Forms
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 1: Forms
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2
90.93 ISO/TC 29/SC 8
Tools for pressing — Elastomer pressure springs — Part 1: General specification
95.99 ISO/TC 29/SC 8
Tools for pressing — Elastomer pressure springs — Part 1: General specification
90.93 ISO/TC 29/SC 8
Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories
95.99 ISO/TC 29/SC 8
Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories
90.93 ISO/TC 29/SC 8
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty
95.99 ISO/TC 29/SC 8
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty
90.93 ISO/TC 29/SC 8
Tools for pressing — Ball-lock punches — Part 2: Ball-lock punches for heavy duty
90.93 ISO/TC 29/SC 8
Tools for pressing — Ball-lock punches
95.99 ISO/TC 29/SC 8
Tools for pressing — Punch holder shanks — Part 1: Types A and B
95.99 ISO/TC 29/SC 8
Tools for pressing — Punch holder shanks — Part 1: Type A
95.99 ISO/TC 29/SC 8
Tools for pressing — Punch holder shanks — Part 1: Type A
90.60 ISO/TC 29/SC 8
Tools for pressing — Punch holder shanks — Part 2: Type C
95.99 ISO/TC 29/SC 8
Tools for pressing — Punch holder shanks — Part 2: Type C
90.93 ISO/TC 29/SC 8
Tools for pressing — Punch holder shanks — Part 3: Type D
95.99 ISO/TC 29/SC 8
Tools for pressing — Punch holder shanks — Part 3: Type D
90.93 ISO/TC 29/SC 8
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
95.99 ISO/TC 29/SC 8
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
95.99 ISO/TC 29/SC 8
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding — Amendment 1
95.99 ISO/TC 29/SC 8
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
60.60 ISO/TC 29/SC 8
Tools for pressing — Die sets
90.93 ISO/TC 29/SC 8
Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty
95.99 ISO/TC 29/SC 8
Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty
90.93 ISO/TC 29/SC 8
Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty
95.99 ISO/TC 29/SC 8
Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty
90.93 ISO/TC 29/SC 8
Tools for pressing — Ball-lock punch retainers — Part 3: Type E, reduced for heavy duty
90.93 ISO/TC 29/SC 8
Tools for pressing — Gas springs — Part 1: General specifications
95.99 ISO/TC 29/SC 8
Tools for pressing — Gas springs — Part 1: General specifications
90.92 ISO/TC 29/SC 8
Tools for pressing — Gas springs — Part 1: General specifications
30.60 ISO/TC 29/SC 8
Tools for pressing — Gas springs — Part 2: Specification of accessories
95.99 ISO/TC 29/SC 8
Tools for pressing — Gas springs — Part 2: Specification of accessories
95.99 ISO/TC 29/SC 8
Tools for pressing — Gas springs — Part 2: Specification of accessories
60.60 ISO/TC 29/SC 8
Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact built height
95.99 ISO/TC 29/SC 8
Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact built height
60.60 ISO/TC 29/SC 8
Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height
95.99 ISO/TC 29/SC 8
Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height
60.60 ISO/TC 29/SC 8
Tools for pressing — Gas springs — Part 5: Safety instructions for gas springs
60.60 ISO/TC 29/SC 8
Tools for pressing — Guide pillar mountings
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide pillar mountings
90.93 ISO/TC 29/SC 8
Tools for pressing — L-shaped guides
95.99 ISO/TC 29/SC 8
Tools for pressing — L-shaped guides
90.93 ISO/TC 29/SC 8
Tools for pressing — Guide plates — U- and V-blocks
95.99 ISO/TC 29/SC 8
Tools for pressing — Guide plates — U- and V-blocks
90.93 ISO/TC 29/SC 8
Press tools for tablets — Punches and dies
95.99 ISO/TC 29/SC 8
Press tools for tablets — Punches and dies
90.93 ISO/TC 29/SC 8
Tools for pressing — Spring plungers with helicoidal compression steel spring or gas spring
60.60 ISO/TC 29/SC 8
Tools for pressing — Heel guidings in large stamping and forming dies
60.60 ISO/TC 29/SC 8
Tools for pressing — Vocabulary
60.60 ISO/TC 29/SC 8
Tools for pressing — Sliding plates
95.99 ISO/TC 29/SC 8
Tools for pressing — Sliding plates
90.93 ISO/TC 29/SC 8
Tools for pressing — Cam driver plates
95.99 ISO/TC 29/SC 8
Tools for pressing — Cam driver plates
95.99 ISO/TC 29/SC 8
Tools for pressing — Cam driver plates
60.60 ISO/TC 29/SC 8

No matching records found. Please try changing the filter settings.