Reference number
ISO/IEC 14443-3:2018
© ISO 2024
International Standard
ISO/IEC 14443-3:2018
Cards and security devices for personal identification — Contactless proximity objects — Part 3: Initialization and anticollision
Edition 4
2018-07
Preview
No disponible en español
Publicado (Edición 4, 2018)
Esta norma tiene 1 modificaciones.

ISO/IEC 14443-3:2018

Idioma
Formato
CHF 194
Convertir Franco suizo (CHF) a tu moneda

Resumen

This document describes the following:

- polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD);

- the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs;

- the initial Request and Answer to Request command content;

- methods to detect and communicate with one PICC among several PICCs (anticollision);

- other parameters required to initialize communications between a PICC and PCD;

- optional means to ease and speed up the selection of one PICC among several PICCs based on application criteria;

- optional capability to allow a device to alternate between the functions of a PICC and a PCD to communicate with a PCD or a PICC, respectively. A device which implements this capability is called a PXD.

Protocol and commands used by higher layers and by applications and which are used after the initial phase are described in ISO/IEC 14443‑4.

This document is applicable to PICCs of Type A and of Type B (as described in ISO/IEC 14443‑2), to PCDs (as described in ISO/IEC 14443‑2) and to PXDs.

NOTE 1 Part of the timing of data communication is defined in ISO/IEC 14443‑2.

NOTE 2 Test methods for this document are defined in ISO/IEC 10373‑6.

Informaciones generales

  • Estado
     : Publicado
    Fecha de publicación
     : 2018-07
    Etapa
    : Norma Internacional publicada [60.60]
  • Edición
     : 4
    Número de páginas
     : 56
  • Comité Técnico :
    ISO/IEC JTC 1/SC 17
    ICS :
    35.240.15 
  • RSS actualizaciones

 Modificaciones

Las enmiendas se emiten cuando se decide que puede ser necesario agregar nuevo material a un documento de normalización existente. También pueden incluir correcciones editoriales o técnicas que deban aplicarse al documento existente.

Amendment 2

Enhancements for harmonization

Edición 2020

Idioma
Formato
CHF 18
Convertir Franco suizo (CHF) a tu moneda

Ciclo de vida

Objetivos de Desarrollo Sostenible

Esta norma contribuye al siguiente Objetivo de Desarrollo Sostenible

9
Industry, Innovation and Infrastructure

¿Tiene alguna duda?

Consulte nuestras Ayuda y asistencia

  2. Tienda
  3. Standards catalogue
  4. ICS
  5. 35
  6. 35.240
  7. 35.240.15
  8. ISO/IEC 14443-3:2018