ISO 13253:2017
2017-07
Resumen
ISO 13253:2017 specifies performance testing, the standard conditions and the test methods for determining the capacity and efficiency ratings of air-cooled, air-conditioners and air-to-air heat pumps.
ISO 13253:2017 is applicable to the following equipment:
- ducted air-cooled air conditioners and ducted air to air heat pumps.
ISO 13253:2017 is limited to
- residential, commercial and industrial single-package, and split-system air conditioners and heat pumps,
- factory-made, electrically driven and use mechanical compression,
- utilizing single, multiple and variable capacity components, and
- multiple split-system utilizing one or more refrigeration systems, one outdoor unit and one or more indoor units, controlled by a single thermostat/controller.
The requirements of testing and rating contained in this document are based on the use of matched assemblies.
ISO 13253:2017 is not applicable to the rating and testing of the following:
a) water-source heat pumps or water-cooled air-conditioners;
b) multi-split-system air-conditioners and air-to-air heat pumps (see ISO 15042 for testing of such equipment);
c) mobile (windowless) units having a condenser exhaust duct;
d) individual assemblies not constituting a complete refrigeration system;
e) equipment using the absorption refrigeration cycle;
f) non-ducted equipment (see ISO 5151 for testing of such equipment);
g) ducted air conditioners and/or ducted heat pumps, rated at less than 8 kW and intended to operate at external static pressures of less than 25 Pa, controlled by a single thermostat/controller (refer to ISO 5151).
ISO 13253:2017 does not cover the determination of seasonal efficiencies, which can be required in some countries because they provide a better indication of efficiency under actual operating conditions.
NOTE Throughout this document, the terms "equipment" and "systems" mean "air-conditioners" and/or "heat pumps".
Informaciones generales
-
Estado: PublicadoFecha de publicación: 2017-07Etapa: Norma Internacional confirmada [90.93]
-
Edición: 3Número de páginas: 89
-
Comité Técnico :ISO/TC 86/SC 6
- RSS actualizaciones
Modificaciones
Las enmiendas se emiten cuando se decide que puede ser necesario agregar nuevo material a un documento de normalización existente. También pueden incluir correcciones editoriales o técnicas que deban aplicarse al documento existente.
Amendment 1
Edición 2020
Ciclo de vida
-
Anteriormente
RetiradaISO 13253:2011
-
Ahora
-
00
Preliminar
-
10
Propuesta
-
20
Preparación
-
30
Comité
-
40
Consulta
-
50
Aprobación
-
60
Publicación
-
90
Revisión
-
95
Retirada
Modificaciones
Aportan contenido adicional; disponible para su compra; no incluidas en el texto de la norma existente.PublicadoISO 13253:2017/Amd 1:2020
-
00
