Filtrar :
| Norma o proyecto | Etapa | TC |
|---|---|---|
|
Petroleum products — Lubricating grease — Determination of cone penetration
|
95.99 | ISO/TC 28 |
|
Petroleum products — Lubricating grease and petrolatum — Determination of cone penetration
|
95.99 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of cone penetration of lubricating greases and petrolatum
|
95.99 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of cone penetration of lubricating greases and petrolatum
|
60.60 | ISO/TC 28 |
|
Petroleum products — Lubricating grease — Determination of dropping point
|
95.99 | ISO/TC 28 |
|
Petroleum products — Lubricating grease — Determination of dropping point
|
90.93 | ISO/TC 28 |
|
Petroleum products — Lubricating grease — Determination of dropping point — Amendment 1
|
60.60 | ISO/TC 28 |
|
Petroleum products — Lubricating grease — Determination of dropping point — Technical Corrigendum 1
|
60.60 | ISO/TC 28 |
|
Petroleum oils — Determination of cloud point
|
95.99 | ISO/TC 28 |
|
Industrial liquid lubricants — ISO viscosity classification
|
95.99 | ISO/TC 28 |
|
Industrial liquid lubricants — ISO viscosity classification
|
90.93 | ISO/TC 28 |
|
Industrial liquid lubricants — ISO viscosity classification — Technical Corrigendum 1
|
60.60 | ISO/TC 28 |
|
Lubricants for machine tools — Classification
|
95.99 | ISO/TC 28 |
|
Lubricants, industrial oils and related products (class L) — Recommendations for the choice of lubricants for machine tools
|
95.99 | ISO/TC 28/SC 4 |
|
Petroleum products — Lubricating oils and additives — Determination of sulphated ash
|
95.99 | ISO/TC 28 |
|
Petroleum products — Lubricating oils and additives — Determination of sulfated ash
|
95.99 | ISO/TC 28 |
|
Petroleum products — Determination of sulfated ash in lubricating oils and additives
|
95.99 | ISO/TC 28 |
|
Petroleum products — Determination of sulfated ash in lubricating oils and additives — Technical Corrigendum 1
|
95.99 | ISO/TC 28 |
|
Petroleum products — Determination of sulfated ash in lubricating oils and additives and fatty acid methyl esters
|
60.60 | ISO/TC 28 |
|
Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids — TOST test — Part 1: Procedure for mineral oils
|
90.93 | ISO/TC 28 |
|
Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids — TOST test — Part 4: Procedure for industrial gear oils
|
90.93 | ISO/TC 28 |
|
Petroleum products — Inhibited mineral oils — Determination of oxidation characteristics
|
95.99 | ISO/TC 28 |
|
Petroleum products — Lubricating oils and additives — Determination of phosphorus content — Quinoline phosphomolybdate method
|
95.99 | ISO/TC 28 |
|
Petroleum products — Determination of foaming characteristics of lubricating oils
|
90.93 | ISO/TC 28 |
|
Petroleum products — Determination of foaming characteristics of lubricating oils — Technical Corrigendum 1
|
60.60 | ISO/TC 28 |
|
Petroleum products — Mineral oils — Determination of interfacial tension of oil against water — Ring method
|
95.99 | ISO/TC 28 |
|
Petroleum products — Determination of dropping point of lubricating greases (wide temperature range)
|
95.99 | ISO/TC 28 |
|
Lubricants, industrial oils and related products (Class L) — Family D (compressors) — Part 1: Specifications of categories DAA and DAB (lubricants for reciprocating and drip feed rotary air compressors)
|
90.60 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (Class L) — Family D (Compressors) — Part 2: Specifications of categories DAG, DAH and DAJ (Lubricants for flooded rotary air compressors)
|
90.60 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (Class L) — Family D (compressors) — Part 3: Specifications of categories DRA, DRB, DRC, DRD, DRE, DRF and DRG (lubricants for refrigerating compressors)
|
90.20 | ISO/TC 28/SC 4 |
|
Petroleum-based lubricating oils — Aging characteristics — Determination of change in Conradson carbon residue after oxidation
|
90.93 | ISO/TC 28 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 0: General
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 1: Family A (Total loss systems)
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 1: Family A (Total loss systems)
|
90.60 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 2: Family F (Spindle bearings, bearings and associated clutches)
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 3: Family D (Compressors)
|
90.20 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 3A: Family D (Compressors)
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 3B: Family D (Gas and refrigeration compressors)
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 5: Family T (Turbines)
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 5: Family T (Turbines)
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 6: Family C (Gears)
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 6: Family C (gear systems)
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 7: Family M (Metalworking)
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 8: Family R (Temporary protection against corrosion)
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 9: Family X (Greases)
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 9: Family X (Greases)
|
90.60 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 10: Family Y (Miscellaneous)
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 11: Family P (Pneumatic tools)
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 12: Family Q (Heat transfer fluids)
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 13: Family G (Slideways)
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 13: Family G (Slideways)
|
90.60 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 14: Family U (Heat treatment)
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 15: Family E (Internal combustion engine oils)
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 15: Family E (Internal combustion engine oils)
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Classification — Part 99: General
|
90.60 | ISO/TC 28/SC 4 |
|
Petroleum products and lubricants — Petroleum lubricating oils for turbines (categories ISO-L-TSA and ISO-L-TGA) — Specifications
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines — Amendment 1: Filterability tests according to ISO 13357-1 and ISO 13357-2 — Requirements related to the stage of the test method
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications for lubricating oils for turbines
|
60.60 | ISO/TC 28/SC 4 |
|
Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method
|
90.93 | ISO/TC 28 |
|
Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method — Amendment 1
|
60.60 | ISO/TC 28 |
|
Industrial quenching oils — Determination of cooling characteristics — Nickel-alloy probe test method
|
90.93 | ISO/TC 28 |
|
Petroleum and natural gas industries — Drilling fluids — Laboratory testing
|
95.99 | ISO/TC 67/SC 3 |
|
Petroleum and natural gas industries — Drilling fluids — Laboratory testing
|
90.93 | ISO/TC 67/SC 3 |
|
Lubricants, industrial oils and related products — Class L — Specifications of categories L-AN, L-FC, L-FD and L-G used for machine tools
|
95.99 | ISO/TC 28/SC 4 |
|
Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 1: Dynamic wet conditions
|
60.60 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 1: Dynamic wet conditions — Amendment 1: Test bearings
|
60.60 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 2: Method with water wash-out
|
95.99 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 2: Method with water wash-out
|
60.60 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases
|
95.99 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of water washout characteristics of lubricating greases
|
95.99 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of water washout characteristics of lubricating greases
|
60.60 | ISO/TC 28 |
|
Petroleum and related products — Guidance for in-servicing of steam, gas and combined cycle turbines lubricating oils
|
40.60 | ISO/TC 28/SC 4 |
|
Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines
|
90.92 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products — Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig — Flender foam test procedure
|
90.93 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of the mechanical stability of greases in presence of water
|
60.60 | ISO/TC 28 |
|
Lubricants, industrial oils and related products (Class L) — Family X (Greases) — Specification
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (Class L) — Family X (Greases) — Specification — Technical Corrigendum 1
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (Class L) — Family X (Greases) — Specifications
|
60.60 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family C (Gears) — Part 1: Specifications for lubricants for enclosed gear systems
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family C (Gears) — Part 1: Specifications for lubricants for enclosed gear systems — Technical Corrigendum 1
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems — Amendment 1: Pour point, according to ISO 3016, of categories CKTG, CKES, CKPG and CKPR — Change of limits
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems
|
60.60 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 2: Specifications of categories CKH, CKJ and CKM (lubricants open and semi-enclosed gear systems)
|
60.60 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (Class L) — Family C (gears) — Part 3: Specifications for greases for enclosed and open gear systems
|
60.60 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family M (Metalworking) — Guidelines for establishing specifications
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications
|
90.93 | ISO/TC 28/SC 4 |
|
Petroleum products and lubricants — Determination of roll stability of lubricating grease — Part 1: Dry condition test
|
40.20 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of roll stability of lubricating grease — Part 2: Wet condition test
|
40.20 | ISO/TC 28 |
|
Petroleum products and lubricants — Rheological properties of lubricating greases — Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
|
50.20 | ISO/TC 28 |
|
Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water
|
95.99 | ISO/TC 28 |
|
Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water
|
90.92 | ISO/TC 28 |
|
Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water
|
50.00 | ISO/TC 28 |
|
Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
|
95.99 | ISO/TC 28 |
|
Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
|
95.99 | ISO/TC 28 |
|
Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
|
90.92 | ISO/TC 28 |
|
Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
|
50.00 | ISO/TC 28 |
|
Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement of viscous properties of completion fluids
|
95.99 | ISO/TC 67/SC 3 |
|
Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement of viscous properties of completion fluids — Technical Corrigendum 1
|
95.99 | ISO/TC 67/SC 3 |
|
Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement of viscous properties of completion fluids
|
90.93 | ISO/TC 67/SC 3 |
|
Petroleum and natural gas industries — Completion fluids and materials — Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
|
95.99 | ISO/TC 67/SC 3 |
|
Petroleum and natural gas industries — Completion fluids and materials — Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations — Amendment 1: Addition of Annex B: Proppand specification
|
95.99 | ISO/TC 67/SC 3 |
|
Petroleum and natural gas industries — Completion fluids and materials — Part 3: Testing of heavy brines
|
95.99 | ISO/TC 67/SC 3 |
|
Petroleum and natural gas industries — Completion fluids and materials — Part 3: Testing of heavy brines — Technical Corrigendum 1
|
60.60 | ISO/TC 67/SC 3 |
|
Petroleum and natural gas industries — Completion fluids and materials — Part 3: Testing of heavy brines
|
60.60 | ISO/TC 67/SC 3 |
|
Petroleum and natural gas industries — Completion fluids and materials — Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions
|
90.93 | ISO/TC 67/SC 3 |
|
Petroleum and natural gas industries — Completion fluids and materials — Part 5: Procedures for measuring the long-term conductivity of proppants
|
90.93 | ISO/TC 67/SC 3 |
|
Petroleum and natural gas industries — Completion fluids and materials — Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions
|
90.20 | ISO/TC 67/SC 3 |
|
Oil and gas industries including lower carbon energy — Completion fluids and materials — Part 8: Measurement of properties of coated proppants used in hydraulic fracturing
|
40.60 | ISO/TC 67/SC 3 |
|
Petroleum products and lubricants — Rheological properties of lubricating greases — Determination of the consistency of greases with metal soap thickener by an oscillatory rheometer with a cone/plate measuring system
|
50.20 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of low-temperature cone penetration of lubricating greases
|
90.93 | ISO/TC 28 |
|
Lubricants, industrial oils and related products (class L) — Family E (Internal combustion engine oils) — Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family E (Internal combustion engine oils) — Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
|
90.93 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for categories HETG, HEPG, HEES and HEPR
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for categories HETG, HEPG, HEES and HEPR
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
|
95.99 | ISO/TC 28/SC 4 |
|
Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
|
60.60 | ISO/TC 28/SC 4 |
|
Lubricants — Determination of tribological quantities for oils and greases — Tribological test in the translatory oscillation apparatus
|
90.93 | ISO/TC 28 |
|
Lubricants, industrial oils and related products (class L) — Machine-tool lubricants — Categories and specifications
|
90.60 | ISO/TC 28/SC 4 |
|
Lubricants — Determination of the Coefficient of Friction of Synchronizer Lubricated by Manual Transmission Fluids (MTF) — High-Frequency, Linear-Oscillation (SRV) Test Machine
|
50.00 | ISO/TC 28 |
|
Petroleum and related products — Determination of the extreme-pressure and anti-wear properties of fluids — Four ball method (European conditions)
|
95.99 | ISO/TC 28 |
|
Petroleum and related products — Determination of the extreme-pressure and anti-wear properties of lubricants — Four-ball method (European conditions)
|
90.93 | ISO/TC 28 |
|
Petroleum products and lubricants — Determination of oil separation from grease — Pressure filtration method
|
90.93 | ISO/TC 28 |
|
Petroleum products and lubricants - Determination of the dropping point of grease with an automatic apparatus
|
90.93 | ISO/TC 28 |
|
Petroleum products — Lubricating greases — Sampling of greases
|
60.60 | ISO/TC 28 |
|
Lubricants, industrial oils and related products (class L) — Family E (internal combustion engine oils) — Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB)
|
90.93 | ISO/TC 28/SC 4 |
|
Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing
|
95.99 | ISO/TC 28 |
|
Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing
|
90.93 | ISO/TC 28 |
No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.