Filtrar :
Norma o proyecto | Etapa | TC |
---|---|---|
Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series
|
95.99 | ISO/TC 131 |
Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series
|
95.99 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series
|
90.60 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinder bores and piston rod diameters — Inch series
|
95.99 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinders — Nominal pressures
|
95.99 | ISO/TC 131 |
Fluid power systems and components — Cylinders — Nominal pressures
|
95.99 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinders — Basic series of piston strokes
|
95.99 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinders — Basic series of piston strokes
|
90.93 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinder barrels — Part 1: Requirements for steel tubes with specially finished bores
|
95.99 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinders — Piston rod thread dimensions and types
|
95.99 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinder piston rod end types and dimensions
|
90.93 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinder piston rod end types and dimensions — Technical Corrigendum 1
|
60.60 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinder rod and piston seals for reciprocating applications — Dimensions and tolerances of housings — Part 1: Normal series
|
95.99 | ISO/TC 131 |
Hydraulic fluid power — Cylinders — Housings for piston and rod seals in reciprocating applications — Dimensions and tolerances
|
95.99 | ISO/TC 131/SC 7 |
Hydraulic fluid power — Cylinders — Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
|
95.99 | ISO/TC 131/SC 7 |
Hydraulic fluid power — Cylinders — Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
|
90.93 | ISO/TC 131/SC 7 |
Hydraulic fluid power — Single rod cylinders — Mounting dimensions — 160 bar (16 000 kPa) series — Part 1: Medium series
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1: Medium series
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1: Medium series
|
90.92 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders — Mounting dimensions — 160 bar (16 000 kPa) series — Part 2: Compact series
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series — Technical Corrigendum 1
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series
|
90.93 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm
|
90.93 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders — Mounting dimensions — 250 bar (25 000 kPa) series
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
|
90.92 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
|
95.99 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
|
95.99 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
|
95.99 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
|
95.99 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
|
90.93 | ISO/TC 131/SC 3 |
Fluid power systems and components — Cylinders — Housings for rod wiper rings in reciprocating applications — Dimensions and tolerances
|
95.99 | ISO/TC 131/SC 7 |
Fluid power systems and components — Cylinder-rod wiper-ring housings in reciprocating applications — Dimensions and tolerances
|
95.99 | ISO/TC 131/SC 7 |
Fluid power systems and components — Cylinder-rod wiper-ring housings in reciprocating applications — Dimensions and tolerances
|
95.99 | ISO/TC 131/SC 7 |
Fluid power systems and components — Cylinder-rod wiper-ring housings in reciprocating applications — Dimensions and tolerances
|
60.60 | ISO/TC 131/SC 7 |
Pneumatic fluid power — Single rod cylinders with integral mountings — 10 bar (1 000 kPa) series — Bores from 32 to 250 mm — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, with integral mountings, bores from 32 mm to 250 mm — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Single rod cylinders with detachable mountings — 10 bar (1 000 kPa) series — Bores from 32 to 320 mm — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Single rod cylinders — 10 bar (1 000 kPa) series — Bores from 8 to 25 mm — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm — Basic and mounting dimensions
|
90.93 | ISO/TC 131/SC 3 |
Pneumatic fluid power systems — Cylinder barrels — Requirements for non-ferrous metallic tubes
|
90.93 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinders — Piston seal housings incorporating bearing rings — Dimensions and tolerances
|
90.93 | ISO/TC 131/SC 7 |
Hydraulic fluid power — Cylinders — Rod end plain eyes — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinders — Rod end plain eyes — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinders — Rod end spherical eyes — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinders — Rod end spherical eyes — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders — Bore and port thread sizes
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinders — Bore and rod area ratios
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinders — Bore and rod area ratios
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part 1: Piston seal housings
|
95.99 | ISO/TC 131/SC 7 |
Hydraulic fluid power cylinders — Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals — Part 1: Piston seal housings
|
60.60 | ISO/TC 131/SC 7 |
Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part 2: Rod seal housings
|
95.99 | ISO/TC 131/SC 7 |
Hydraulic fluid power cylinders — Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals — Part 2: Rod seal housings
|
60.60 | ISO/TC 131/SC 7 |
Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) compact series — Tolerances
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Tolerances
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series — Mounting dimensions for accessories
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series — Mounting dimensions for accessories
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
|
90.92 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Accessory mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Mounting dimensions for accessories
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
|
90.92 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series — Tolerances
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series — Tolerances
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) medium series — Port dimensions
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 250 bar (25 MPa) series — Port dimensions
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) compact series — Port dimensions
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Port dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders, 10 bar (1 000 kPa) series — Rod end spherical eyes — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Rod end spherical eyes — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end spherical eyes
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end spherical eyes
|
90.93 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders, 10 bar (1 000 kPa) series — Rod end clevis — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Rod end clevis — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end clevises
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end clevises
|
90.93 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders — Acceptance test
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders — Final examination and acceptance criteria
|
90.93 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinders — Acceptance test
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinders — Acceptance tests
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinders — Acceptance tests — Amendment 1
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinders — Acceptance tests
|
60.60 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinder mounting dimensions — 10 MPa (100 bar) series
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Mounting dimensions for cylinders, 10 MPa (100 bar) series
|
90.93 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
|
95.99 | ISO/TC 131/SC 7 |
Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
|
95.99 | ISO/TC 131/SC 7 |
Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
|
90.93 | ISO/TC 131/SC 7 |
Hydraulic fluid power — Cylinders — Method for determining the buckling load
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Method for evaluating the buckling load of a hydraulic cylinder
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Method for evaluating the buckling load of a hydraulic cylinder
|
90.20 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions
|
90.92 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions
|
90.60 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) — Mounting dimensions
|
95.99 | ISO/TC 131/SC 3 |
Hydraulic fluid power — Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) — Mounting dimensions
|
90.93 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders — Load capacity of pneumatic slides and their presentation method
|
95.99 | ISO/TC 131/SC 3 |
Pneumatic fluid power — Cylinders — Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
|
90.93 | ISO/TC 131/SC 3 |
No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.