Filter :
| Standard and/or project | Stage | TC |
|---|---|---|
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in aluminium oxide powders using inductively coupled plasma-optical emission spectrometry
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of calcium-phosphate-based powders for non-biomedical applications
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of uniaxial tensile properties of tubes
|
40.20 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for thermal property measurements of metalized ceramic substrates — Part 1: Evaluation of thermal resistance for use in power modules
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of metal impurities in silicon dioxide powders using inductively coupled plasma-optical emission spectrometry
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for GaN crystal surface defects — Part 1: Classification of defects
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for GaN crystal surface defects — Part 2: Method for determining etch pit density
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Method for measuring the power generation characteristics of piezoelectric resonant devices for stand-alone power sources
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining tensile and shear creep of ceramic adhesive
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Relative method for determining thermal conductivity of ceramic coatings
|
50.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determination of monoclinic phase in zirconia
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Physical properties of ceramic composites — Guidelines for determination of void and fibre contents in polished cross section by image analysis
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semiconducting photocatalytic materials
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for interfacial bond strength of ceramic materials
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antifungal activity of semiconducting photocatalytic materials
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural characterization — Part 1: Determination of grain size and size distribution
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural characterization — Part 2: Determination of phase volume fraction by evaluation of micrographs
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for optical properties of ceramic phosphors for white light-emitting diodes with reference materials
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of compression properties
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of compressive properties
|
60.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of tensile properties
|
60.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for open-hole tension of continuous fibre-reinforced ceramic matrix composites at room temperature
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of fracture strain
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of porous ceramics at room temperature
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for rolling contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of flowability of ceramic powders
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Sample preparation for the determination of particle size distribution of ceramic powders
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Sample preparation for the determination of particle size distribution of ceramic powders
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature — Technical Corrigendum 1
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Classification system
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile strength of monolithic ceramics at room temperature
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile strength of monolithic ceramics at room temperature
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile stress-strain behaviour of continuous, fibre- reinforced composites at room temperature
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment
|
90.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for interfacial bond strength of ceramic materials at elevated temperatures
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength
|
40.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of ceramic composites — Determination of thermal expansion
|
90.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of fatigue properties at constant amplitude
|
90.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure — Determination of fatigue properties at constant amplitude
|
90.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Determination of the degree of misalignment in uniaxial mechanical tests
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of monolithic ceramics at room temperature — Determination of compressive strength
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of monolithic ceramics at room temperature — Determination of flexural strength by the ring-on-ring test
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 1: Removal of nitric oxide
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 1: Removal of nitric oxide
|
40.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 2: Removal of acetaldehyde
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 2: Removal of acetaldehyde
|
40.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 3: Removal of toluene
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 3: Removal of toluene
|
40.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 4: Removal of formaldehyde
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 4: Removal of formaldehyde
|
40.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 5: Removal of methyl mercaptan
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 5: Removal of methyl mercaptan
|
40.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for spherical indentation of porous ceramics
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of compaction properties of ceramic powders
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance — Technical Corrigendum 1
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for linear thermal expansion of monolithic ceramics by push-rod technique
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at elevated temperature
|
90.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of tests for reinforcements — Determination of the tensile properties of ceramic filaments at elevated temperature in air using the hot grip technique
|
40.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal fatigue of fine ceramics substrate
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of piezoelectric strain at high electric field
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of drying loss of ceramic granules
|
90.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of spectral transmittance of fine ceramics thin films under humid condition
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of boron nitride powders
|
90.20 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders
|
90.92 | ISO/TC 206 |
|
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) — Determination of antiviral activity of semiconducting photocatalytic materials — Test method using bacteriophage Q-beta
|
90.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of antiviral activity of semiconducting photocatalytic materials under indoor lighting environment — Test method using bacteriophage Q-beta
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of thickness of ceramic films by contact-probe profilometer
|
90.20 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Testing method for macro-heterogeneity in microstructure
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of ceramic tube and rings
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment — Part 1: Removal of formaldehyde
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of compressive strength of ceramic granules
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of the resistance to crack propagation by notch sensitivity testing
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of elastic properties by ultrasonic technique
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in yttrium oxide powders using inductively coupled plasma-optical emission spectrometry
|
40.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pyknometer
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pycnometer
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of density and apparent porosity
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of density and apparent porosity
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of density and apparent porosity
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of thermal diffusivity of monolithic ceramics by laser flash method
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of thermal diffusivity of monolithic ceramics by flash method
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
|
90.20 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of specific surface area of ceramic powders by gas adsorption using the BET method
|
90.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at elevated temperature in air atmospheric pressure — Determination of in-plane shear strength
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of thick ceramic coatings
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of stress-rupture time diagram under constant tensile loading
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for surface roughness of fine ceramic films by atomic force microscopy
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for surface roughness of fine ceramic films by atomic force microscopy
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of viscosity of ceramic slurry by use of a rotational viscometer
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer
|
60.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for piezoelectric constant d33 of piezoelectric ceramics by direct quasi-static method
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of ceramic composites — Determination of specific heat capacity
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of ceramic composites — Determination of specific heat capacity
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of ceramic composites — Determination of unidimensional thermal diffusivity by flash method
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for reinforcements — Determination of tensile properties of filaments at ambient temperature
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for reinforcements — Determination of tensile properties of filaments at ambient temperature
|
40.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Notations and symbols
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Notations and symbols
|
40.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antialgal activity of semiconducting photocatalytic materials
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for complete decomposition performance of semiconducting photocatalytic materials under indoor lighting environment — Decomposition of acetaldehyde
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of internal stress in ceramic coatings by application of the Stoney formula
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of internal stress in ceramic coatings by application of the Stoney formula
|
40.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment — Measurement of water contact angle
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment — Measurement of water contact angle
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties of tubes
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for optical properties of ceramic phosphors for white light-emitting diodes using an integrating sphere
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of thixotropic behaviour of ceramic slurry by use of a rotational viscometer
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for interfacial tensile and shear fatigue properties of ceramic joining loaded in constant amplitude at room temperature
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Weibull statistics for strength data
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Weibull statistics for strength data — Technical Corrigendum 1
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Weibull statistics for strength data
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of adhesion of ceramic coatings by scratch testing
|
90.20 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of adhesion of ceramic coatings by scratch testing — Technical Corrigendum 1
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of compressive properties
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of compressive properties
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the interlaminar shear strength of continuous-fibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of the interlaminar shear strength and shear modulus of continuous-fibre-reinforced composites by the compression of double-notched test pieces and by the Iosipescu test
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Vocabulary
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Vocabulary
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Vocabulary
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of light transmittance of ceramic films with transparent substrate
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of oxidation resistance of non-oxide monolithic ceramics
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Qualitative and semiquantitative assessment of the photocatalytic activities of surfaces by the reduction of resazurin in a deposited ink film
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramic thin plates at room temperature
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method
|
50.00 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural bond strength of ceramics
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining density of ceramic coatings
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of high purity barium titanate powders
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of aluminium nitride powders
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Characteristic of piezoelectric properties under high-load conditions — Part 1: Resonant-antiresonant method under high-temperature conditions
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Characteristic of piezoelectric properties under high-load conditions — Part 2: Electrical transient response method under high vibration levels
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet photoluminescence image test method for analysing polytypes of boron- and nitrogen-doped SiC crystals
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of densification properties of ceramic powders on natural sintering
|
90.20 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of iso-electric point of ceramic powder
|
90.20 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for plasma resistance of ceramic components in semiconductor manufacturing equipment
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of hoop tensile properties of tubes
|
90.20 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 1: Removal of nitric oxide
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 1: Removal of nitric oxide
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 2: Removal of acetaldehyde
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 2: Removal of acetaldehyde
|
90.20 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 3: Removal of toluene
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 3: Removal of toluene
|
90.20 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 4: Removal of formaldehyde
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 4: Removal of formaldehyde
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 5: Removal of methyl mercaptan
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 5: Removal of methyl mercaptan
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for cyclic bending fatigue of monolithic ceramics at room temperature
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile creep of monolithic ceramics
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for crystalline quality of single-crystal thin film (wafer) using XRD method with parallel X-ray beam
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Reinforcement of ceramic composites — Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Reinforcement of ceramic composites — Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bacterial reduction rate by semiconducting photocatalytic materials under indoor lighting environment — Semi-dry method for estimating antibacterial activity on the actual environmental bacteria contamination surface
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determination of phenol oxidative decomposition performance of semiconducting photocatalytic materials by quantitative analysis of total organic carbon (TOC)
|
90.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining bonding strength of ceramic coatings
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 1: Tap density
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 2: Untapped density
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for total electrical conductivity of conductive fine ceramics
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining thermal expansion coefficient and residual stress of CVD ceramic coatings
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for evaluating wear and friction characteristics of fine ceramic thin films under dry and humid conditions
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of spectral reflectance of fine ceramic thin films under humid conditions
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of zirconium oxide powders
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for optical properties of ceramic phosphors for white light-emitting diodes using a gonio-spectrofluorometer
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of tests for reinforcements — Determination of the tensile properties of resin-impregnated yarns
|
90.92 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of tests for reinforcements — Determination of the tensile properties of resin-impregnated yarns
|
40.98 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of particle size distribution of ceramic powders by laser diffraction method
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of content of coarse particles in ceramic powders by wet sieving method
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — LED light source for testing semiconducting photocatalytic materials used under indoor lighting environment
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials at room and high temperatures
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of coating thickness by crater-grinding method
|
90.20 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the abrasion resistance of coatings by a micro-scale abrasion test
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation test for evaluation of adhesion of ceramic coatings
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation test for evaluation of adhesion of ceramic coatings
|
60.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Silicon nitride materials for rolling bearing balls
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Silicon nitride materials for rolling bearing balls and rollers
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antibacterial activity of semiconducting photocatalytic materials
|
95.99 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antibacterial activity of semiconducting photocatalytic materials
|
90.60 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for self-cleaning performance of semiconducting photocatalytic materials — Measurement of water contact angle
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal-shock resistance of porous ceramics
|
90.93 | ISO/TC 206 |
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for cyclic bending fatigue of porous ceramics at room temperature
|
90.93 | ISO/TC 206 |
No matching records found. Please try changing the filter settings.