Filter :
Standard and/or project under the direct responsibility of ISO/TC 92/SC 2 Secretariat | Stage | ICS |
---|---|---|
Fire-resistance tests — Elements of building construction — Part 1: General requirements
|
90.92 | |
Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 1
|
60.60 | |
Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 2
|
60.60 | |
Fire-resistance tests — Elements of building construction — Part 1: General requirements
|
40.60 | |
Fire-resistance tests — Elements of building construction — Part 2: Requirements and recommendations for measuring furnace exposure on test samples
|
90.60 | |
Fire-resistance tests — Elements of building construction — Part 2: Guidance on measuring uniformity of furnace exposure on test samples
|
95.99 | |
Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and test data application
|
95.99 | |
Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
|
90.92 | |
Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements
|
90.93 | |
Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements
|
90.93 | |
Fire-resistance tests — Elements of building construction — Part 6: Specific requirements for beams
|
90.93 | |
Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns
|
90.92 | |
Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns
|
40.60 | |
Fire-resistance tests — Elements of building construction — Part 8: Specific requirements for non-loadbearing vertical separating elements
|
90.93 | |
Fire-resistance tests — Elements of building construction — Part 8: Specific requirements for non-loadbearing vertical separating elements — Technical Corrigendum 1
|
60.60 | |
Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements
|
90.93 | |
Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements — Technical Corrigendum 1
|
60.60 | |
Fire resistance tests — Elements of building construction — Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
|
90.20 | |
Fire resistance tests — Elements of building construction — Part 11: Specific requirements for the assessment of fire protection to structural steel elements
|
90.20 | |
Fire resistance tests — Elements of building construction — Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces
|
90.93 | |
Fire-resistance tests — Elements of building construction — Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings
|
90.93 | |
Fire-resistance tests — Elements of building construction — Part 14: Requirements for the testing and assessment of applied fire protection to solid steel bar
|
90.93 | |
Fire resistance tests — Door and shutter assemblies — Part 1: General requirements
|
90.92 | |
Fire resistance tests — Door and shutter assemblies — Part 1: General requirements
|
40.60 | |
Fire-resistance tests — Part 2: Lift landing door assemblies
|
95.99 | |
Fire-resistance tests — Part 2: Lift landing door assemblies
|
90.92 | |
Fire-resistance tests — Part 2: Lift landing door assemblies
|
20.00 |
|
Fire resistance tests — Part 3: Door and shutter assemblies horizontally oriented
|
90.93 | |
Fire resistance tests — Door and shutter assemblies — Part 4: Linear joint fire seal materials used to seal the gap between a fire door frame and the supporting construction
|
60.60 | |
Fire-resistance tests — Door and shutter assemblies — Amendment 1
|
95.99 | |
Fire resistance tests — Door and shutter assemblies
|
95.99 | |
Fire-resistance tests — Door and shutter assemblies
|
95.99 | |
Fire-resistance tests — Glazed elements — Amendment 1
|
95.99 | |
Fire-resistance tests — Elements of building construction — Glazed elements
|
90.20 | |
Fire tests — Small chimneys — Testing at elevated temperatures
|
95.99 | |
Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests
|
90.92 | |
Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests — Amendment 1
|
60.60 | |
Fire tests — Smoke control door and shutter assemblies — Part 2: Commentary on test method and test data application
|
95.99 | |
Fire tests — Smoke-control door and shutter assemblies — Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy
|
90.92 | |
Fire tests — Smoke-control door and shutter assemblies
|
30.60 |
|
Fire-resistance tests — Contribution made by suspended ceilings to the protection of steel beams in floor and roof assemblies
|
95.99 | |
Fire containment — Elements of building construction — Part 1: Ventilation ducts
|
95.99 | |
Fire containment — Elements of building construction — Part 1: Ventilation ducts — Amendment 1
|
95.99 | |
Fire containment — Elements of building construction — Part 1: Ventilation ducts
|
60.60 | |
Fire containment — Elements of building construction — Part 2: Kitchen extract ducts
|
90.93 | |
Fire resistance tests — Ventilation ducts
|
95.99 | |
Principles and rationale underlying calculation methods in relation to fire resistance of structural elements
|
95.99 | |
Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test method
|
95.99 | |
Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test method — Amendment 1
|
95.99 | |
Fire resistance tests — Fire dampers for air distribution systems — Part 2: Classification, criteria and field of application of test results
|
95.99 | |
Fire resistance tests — Fire dampers for air distribution systems — Part 3: Guidance on the test method
|
95.99 | |
Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of thermal release mechanism
|
95.99 | |
Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of thermal release mechanism — Amendment 1: Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen
|
95.99 | |
Fire resistance tests — Fire dampers for air distribution systems — Part 5: Intumescent fire dampers
|
90.20 | |
Fire tests for building elements and components — Fire testing of service installations — Part 1: Penetration seals
|
90.92 | |
Fire tests for building elements and components — Fire testing of service installations — Part 1: Penetration seals
|
30.60 |
|
Fire tests for building elements and components — Fire testing of service installations — Part 2: Linear joint (gap) seals
|
90.93 | |
Fire tests for building elements and components — Fire testing of service installations — Part 2: Linear joint (gap) seals — Technical Corrigendum 1
|
60.60 | |
Fire tests for building elements and components — Fire testing of service installations — Part 3: Single component penetration seals — Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
|
60.60 | |
External exposure of roofs to fire — Part 1: Test method
|
95.99 | |
External exposure of roofs to fire — Part 1: Test method
|
90.20 | |
External fire exposure to roofs — Part 2: Classification of roofs
|
95.99 | |
External exposure of roofs to fire — Part 2: Classification of roofs
|
95.99 | |
External exposure of roofs to fire — Part 3: Commentary
|
60.60 | |
Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 1: Loadbearing elements and vertical and horizontal separating elements
|
60.60 | |
Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 2: Non-loadbearing elements
|
60.60 | |
Fire-resistance tests — Guidance on the application and extension of results
|
95.99 | |
Computational structural fire design — Review of calculation models, fire tests for determining input material data and needs for further development
|
90.93 | |
Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals
|
90.93 | |
Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
|
95.99 | |
Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
|
60.60 | |
Fire resistance — Guidelines for evaluating the predictive capability of calculation models for structural fire behaviour
|
90.93 | |
Fire resistance tests — Guidelines for computational structural fire design
|
60.60 | |
Fire resistance tests — Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation
|
60.60 | |
Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries — Part 1: General requirements
|
90.93 | |
Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries — Part 2: Additional procedures for pipe penetration and cable transit sealing systems
|
60.60 | |
Fire resistance tests — Elements of building construction — Requirements for active fire curtains
|
60.60 | |
Guidance on the calculation of asymmetrical partitions/vertical membranes with respect to their fire resistance performance
|
20.20 | |
Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels
|
95.99 | |
Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels
|
60.60 | |
Fire resistance tests — Fire dampers for air distribution systems — Part 1: Mechanical dampers
|
90.60 | |
Fire resistance tests — Fire dampers for air distribution systems — Part 2: Intumescent dampers
|
60.60 | |
Review of outputs for fire containment tests for buildings in the context of fire safety engineering
|
95.99 | |
Determination of the resistance to jet fires of passive fire protection materials — Part 1: General requirements
|
95.99 | |
Determination of the resistance to jet fires of passive fire protection materials — Part 1: General requirements
|
60.60 | |
Determination of the resistance to jet fires of passive fire protection — Part 2: Guidance on test method selection and implementation methods
|
30.60 |
|
Determination of the resistance to jet fires of passive fire protection — Part 2: Guidance on classification and implementation methods
|
95.99 | |
Determination of the resistance to jet fires of passive fire protection materials — Part 3: Extended test requirements
|
60.00 | |
Determination of the resistance to gas explosions of passive fire protection materials — Part 1: General requirements
|
60.60 | |
Determination of the resistance to gas explosions of passive fire protection materials — Part 2: Divisional substrates
|
40.60 | |
Determination of the resistance to gas explosions of passive fire protection materials — Part 3: Tubular and I-section substrates subject to elastic deformation only
|
30.60 |
|
No matching records found. Please try changing the filter settings.