Filter :
Standard and/or project under the direct responsibility of ISO/TC 29/SC 8 Secretariat Stage ICS
Ejector pins with cylindrical head — Dimensions
95.99
Tools for moulding — Ejector pins with cylindrical head
95.99
Tools for moulding — Ejector pins with cylindrical head
90.60
Round punches with 60 degrees conical head and straight shank
95.99
Tools for pressing — Round punches with 60 degrees conical head and straight shank
90.60
Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools, jigs and fixtures
95.99
Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools
90.93
Tools for pressing and moulding — Machined plates — Part 2: Machined plates for moulds
90.93
Machined plates for press tools, moulds, jigs and fixtures — Nominal dimensions
95.99
Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered
95.99
Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered
90.93
Mould guide bushes, headed, and locating guide bushes, headed
95.99
Tools for moulding — Guide bushes, headed, and locating guide bushes, headed
90.93
Punches with cylindrical head and reduced shank
95.99
Tools for pressing — Punches with cylindrical head and reduced shank
95.99
Tools for pressing — Punches with cylindrical head and straight or reduced shank
90.93
Round punches with cylindrical head and straight shank
95.99
Angle pins — Basic dimensions
95.99
Tools for moulding — Angle pins
95.99
Tools for moulding — Angle pins
95.99
Tools for moulding — Angle pins
60.60
Ejector sleeves with cylindrical head — Basic series for general purposes
95.99
Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes
95.99
Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes
95.99
Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes
90.92
Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes
40.60
Mould bases — Locating elements
95.99
Tools for moulding — Mould bases — Round locating elements and spacers
95.99
Tools for moulding — Mould bases — Round locating elements and spacers
90.93
Tools for moulding — Flat ejector pins
95.99
Tools for moulding — Flat ejector pins
95.99
Tools for moulding — Flat ejector pins
90.60
Tools for moulding — Shouldered ejector pins
95.99
Tools for moulding — Shouldered ejector pins
95.99
Tools for moulding — Shouldered ejector pins
90.60
Tools for pressing — Punches — Nomenclature and terminology
95.99
Tools for pressing — Punches — Nomenclature and terminology
90.93
Tools for pressing — Round matrixes
95.99
Tools for pressing — Matrixes
90.93
Tools for pressing — Guides for round punches
95.99
Tools for pressing — Round punches with 60 degrees conical head and reduced shank
95.99
Tools for pressing — Round punches with 60 degrees conical head and reduced shank
90.93
Tools for pressing — Guide pillars — Part 1: Types
95.99
Tools for pressing — Guide pillars — Part 1: Types
90.92
Tools for pressing — Guide pillars — Part 1: Types
40.20
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
95.99
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
90.92
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
40.20
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
95.99
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
95.99
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
90.92
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
40.20
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
95.99
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
95.99
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
90.92
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
40.20
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
95.99
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
95.99
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
90.92
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
40.20
Tools for pressing — Wear plates for press dies — Part 1: Type A
95.99
Tools for pressing — Wear plates for press dies — Part 1: Type A
90.93
Tools for pressing — Wear plates for press dies — Part 2: Type B
95.99
Tools for pressing — Wear plates for press dies — Part 2: Type B
90.93
Tools for pressing — Guide bushes — Part 1: Forms
95.99
Tools for pressing — Guide bushes — Part 1: Forms
90.93
Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1
95.99
Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1
90.93
Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1
95.99
Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1
90.93
Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1
95.99
Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1
90.93
Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1
95.99
Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1
90.93
Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1
95.99
Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1
90.93
Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1
95.99
Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1
90.93
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1
95.99
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1
90.93
Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2
95.99
Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2
90.93
Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2
95.99
Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2
90.93
Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2
95.99
Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2
90.93
Tools for moulding — Centring sleeves
95.99
Tools for moulding — Centring sleeves
90.93
Tools for pressing — Elastomer pressure springs — Part 1: General specification
95.99
Tools for pressing — Elastomer pressure springs — Part 1: General specification
90.93
Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories
95.99
Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories
90.93
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty
95.99
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty
90.93
Tools for pressing — Ball-lock punches — Part 2: Ball-lock punches for heavy duty
90.93
Tools for pressing — Ball-lock punches
95.99
Tools for moulding — Sprue bushes — Dimensions
95.99
Tools for moulding — Sprue bushes — Dimensions
90.93
Tools for moulding — Support pillars
95.99
Tools for moulding — Support pillars
90.93
Tools for pressing — Punch holder shanks — Part 1: Types A and B
95.99
Tools for pressing — Punch holder shanks — Part 1: Type A
95.99
Tools for pressing — Punch holder shanks — Part 1: Type A
90.60
Tools for pressing — Punch holder shanks — Part 2: Type C
95.99
Tools for pressing — Punch holder shanks — Part 2: Type C
90.93
Tools for pressing — Punch holder shanks — Part 3: Type D
95.99
Tools for pressing — Punch holder shanks — Part 3: Type D
90.93
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
95.99
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
95.99
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding — Amendment 1
95.99
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
60.60
Tools for moulding — Locating rings — Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds — Types A and B
95.99
Tools for moulding — Locating rings — Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
90.93
Tools for moulding — Locating rings — Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
90.93
Tools for pressing — Die sets
90.93
Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty
95.99
Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty
90.93
Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty
95.99
Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty
90.93
Tools for pressing — Ball-lock punch retainers — Part 3: Type E, reduced for heavy duty
90.93
Tools for pressing — Gas springs — Part 1: General specifications
95.99
Tools for pressing — Gas springs — Part 1: General specifications
90.92
Tools for pressing — Gas springs — Part 1: General specifications
30.60
Tools for pressing — Gas springs — Part 2: Specification of accessories
95.99
Tools for pressing — Gas springs — Part 2: Specification of accessories
95.99
Tools for pressing — Gas springs — Part 2: Specification of accessories
60.60
Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact built height
95.99
Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact built height
60.60
Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height
95.99
Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height
60.60
Tools for pressing — Gas springs — Part 5: Safety instructions for gas springs
60.60
Tools for pressing — Guide pillar mountings
95.99
Tools for pressing — Guide pillar mountings
90.93
Tools for moulding — Components of compression and injection moulds and diecasting dies — Terms and symbols
95.99
Tools for moulding — Components of compression and injection moulds and diecasting dies — List of equivalent terms and symbols
60.60
Tools for moulding — Thermal insulating sheets for injection moulds
90.93
Tools for pressing — L-shaped guides
95.99
Tools for pressing — L-shaped guides
90.93
Tools for pressing — Guide plates — U- and V-blocks
95.99
Tools for pressing — Guide plates — U- and V-blocks
90.93
Tools for moulding — Sprue pullers
90.93
Tools for moulding — Tool specification sheet for injection moulds
95.99
Tools for moulding — Tool specification sheet for injection moulds
90.93
Press tools for tablets — Punches and dies
95.99
Press tools for tablets — Punches and dies
90.93
Tools for pressing — Spring plungers with helicoidal compression steel spring or gas spring
60.60
Tools for pressing — Heel guidings in large stamping and forming dies
60.60
Tools for pressing — Vocabulary
60.60
Tools for pressing — Sliding plates
95.99
Tools for pressing — Sliding plates
90.93
Tools for pressing — Cam driver plates
95.99
Tools for pressing — Cam driver plates
95.99
Tools for pressing — Cam driver plates
60.60
Tools for moulding — Tool specification sheet for diecasting dies
90.93
Compression and injection moulds — Components for gating systems
90.93

No matching records found. Please try changing the filter settings.