Текущий статус : Отозвано

Это стандарт пересмотренISO 11119-3:2020

Тезис

ISO 11119-3:2013 specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.

The cylinders and tubes in ISO 11119-3:2013 are

  • Type 4 Fully Wrapped Cylinders or Tubes with a non-load sharing liner and composite reinforcement on both the cylindrical portion and the dome ends, and
  • Type 5 Fully Wrapped Cylinders or Tubes without liners (including cylinders without liners manufactured from two parts joined together) and with a test pressure of less than 60 bar.

The cylinders are constructed

  • in the form of a disposable mandrel overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a resin matrix to provide longitudinal and circumferential reinforcement, and
  • in the form of two filament wound shells joined together.

Cylinders and tubes manufactured and tested to ISO 11119-3:2013 are not intended to contain toxic, oxidizing or corrosive gases.

ISO 11119-3:2013 is limited to cylinders and tubes with composite reinforcement of carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix.

Cylinders and tubes manufactured and tested to ISO 11119-3:2013 have a minimum design life of 15 years.

ISO 11119-3:2013 does not address the design, fitting and performance of removable protective sleeves.

Общая информация

  • Текущий статус
     : Отозвано
    Дата публикации
     : 2013-04
    Этап
    : Отмена международного стандарта [95.99]
  • Версия
     : 2
  • Технический комитет :
    ISO/TC 58/SC 3
    ICS :
    23.020.35 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)

  2. Интернет-магазин
  3. Каталог стандартов
  4. МКС
  5. 23
  6. 23.020
  7. 23.020.35
  8. ISO 11119-3:2013