Тезис
ISO 4080:2009 specifies three methods for the determination of the volume of gas diffusing through a rubber or plastics hose or length of tubing in a specified time.
- Method 1: For determining the permeability of the complete hose or length of tubing, excluding end-fittings, to the test gas. The permeability is calculated with respect to the length of the hose or tubing.
- Method 2: For determining the permeability at the hose/fitting interface. This method is used when determining the permeability characteristics of hoses with an unpricked cover, when the gas usually issues from the textile reinforcement at the cut ends. The permeability is calculated with respect to the length of the hose.
- Method 3: For determining precisely the permeability of a hose or hose assembly to the test gas. The permeability is calculated with respect to the surface area of the hose lining.
The methods are applicable only to gases which are insoluble in water.
Общая информация
-
Текущий статус: ОпубликованоДата публикации: 2009-12Этап: Между-народный стандарт подлежит пересмотру [90.92]
-
Версия: 4
-
Технический комитет :ISO/TC 45/SC 1ICS :23.040.70
- RSS обновления
Предпросмотр
Предварительно ознакомьтесь с этим стандартом в нашем Он-лайн библиотека стандартов (OBP)
Жизненный цикл
-
Ранее
-
Сейчас
ОпубликованоISO 4080:2009
Стандарт, который пересматривается каждые 5 лет
Этап: 90.92 (Будет пересмотрено)-
00
Предварительная стадия
-
10
Стадия, связанная с внесением предложения
-
20
Подготовительная стадия
-
30
Стадия, связанная с подготовкой проекта комитета
-
40
Стадия, связанная с рассмотрением проекта международного стандарта
-
50
Стадия, на которой осуществляется принятие стандарта
-
60
Стадия, на которой осуществляется публикация
-
90
Стадия пересмотра
-
95
Стадия, на которой осуществляется отмена стандарта
-
00
-
Будет заменено
В стадии разработкиISO/DIS 4080
Появились вопросы?
Ознакомьтесь с FAQ
Работа с клиентами
+41 22 749 08 88
Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)