ISO 15202-3:2004

недоступно на русском языке

Опубликовано (Версия 1, 2004)

Последний раз этот публикация был пересмотрен в 2019. Поэтому данная версия остается актуальной.

ISO 15202-3:2004

CHF 173

Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

ISO 15202-3:2004 prescribes a procedure for the use of inductively coupled plasma atomic emission spectrometry for analysing test solutions prepared as prescribed in ISO 15202-2 from samples of airborne particulate matter collected as prescribed in ISO 15202-1. Method development, performance checks and a routine analysis method are prescribed.

The procedure suffers from no significant spectral interferences, provided that suitable analytical wavelengths are used. However, inaccurate background correction and/or inadequate matrix-matching can adversely affect results.

ISO 15202-3:2004 is applicable to the following non-exclusive list of metals and metalloids for which limit values have been set; however, there is no information available on the effectiveness of any of the sample dissolution methods specified in ISO 15202-2 for those elements in italics:

aluminium, antimony, arsenic, barium, beryllium, bismuth, boron, caesium, cadmium, calcium, chromium, cobalt, copper, hafnium, indium, iron, lead, lithium, magnesium, manganese, mercury, molybdenum, nickel, phosphorus, platinum, potassium, rhodium, selenium, silver, sodium, strontium, tantalum, tellurium, thallium, tin, titanium, tungsten, uranium, vanadium, yttrium, zinc and zirconium.

ISO 15202-3:2004 is not applicable to determination of elemental mercury, since mercury vapour is not collected using the sampling method specified in ISO 15202-1.

The results obtained may be used for the assessment of workplace exposure to metals and metalloids for comparison with limit values.

Общая информация

Текущий статус
: Опубликовано

Дата публикации
: 2004-11

Этап
: Систематический пересмотр международного стандарта [90.20]
Версия
: 1
Технический комитет :
ISO/TC 146/SC 2

ICS :
13.040.30
RSS обновления