ISO 4308-1:2003
Cranes and lifting appliances — Selection of wire ropes — Part 1: General
Reference number
ISO 4308-1:2003
Версия 3
В время отменен
ISO 4308-1:2003
Отозвано (Версия 3, 2003)


ISO 4308-1:2003 specifies two methods for the selection of wire rope to be used on lifting appliances as designated in ISO 4306-1, one based on the value of the rope selection factor C and the other based on the value of the coefficient of utilization Zp ISO 4308-1:2003 establishes the minimum requirements for acceptable strength and performance levels of wire ropes with respect to the design, application and maintenance of the lifting appliance. ISO 4308-1:2003 establishes the minimum requirements for the diameters of drums and sheaves that are to be associated with the selected wire rope.A non-exhaustive list of types of lifting appliance to which ISO 4308-1:2003 is applicable is given in Annex A.

Annex B provides some examples of rope selection.Annex C gives factors, additional to those mentioned above, which may need consideration when selecting the wire rope.Annex D specifies the selection method for the diameter of the compensating sheave when used in relation to hoists.

Общая информация

  •  : Отозвано
     : 2003-05
     : 2003-10
    : Отмена международного стандарта [95.99]
  •  : 3
  • ISO/TC 96/SC 3
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)