Reference number
ISO 12301:2007
International Standard
ISO 12301:2007
Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics
Edition 2
2007-10
Preview
ISO 12301:2007
36511
недоступно на русском языке
Опубликовано (Версия 2, 2007)
Последний раз этот публикация был пересмотрен в  2023. Поэтому данная версия остается актуальной.

ISO 12301:2007

ISO 12301:2007
36511
Язык
Формат
CHF 173
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

ISO 12301:2007 specifies quality control techniques and inspection of the geometrical and material quality characteristics of the following types of plain bearings: thin-walled half-bearings with or without flange, as specified in ISO 3548; metallic thick-walled half-bearings (with and without flange) that are manufactured as halves but that are necessarily interchangeable and have the ratio s3 : Do > 0,11; wrapped bushes, as specified in ISO 3547; unsplit metallic bushes (with and without flange) made from solid and multilayer materials and with outside diameters up to 230 mm; solid polymer bushes (with and without flange) with inside diameters up to 200 mm; ring-type thrust washers and pressed bimetallic half-thrust washers, as specified in ISO 6525 and ISO 6526, respectively; and bushes made from sintered material, as specified in ISO 2795.

Общая информация

  •  : Опубликовано
     : 2007-10
    : Международный стандарт подлежит пересмотру [90.92]
  •  : 2
  • ISO/TC 123/SC 5
    21.100.10 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ