Welded or seamless steel tubes for water, sewage and gas

Steel tubes for water and sewage

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system

Ductile iron pipes, fittings, accessories and their joints for water or gas applications

Ductile iron pipes, fittings, accessories and their joints for water applications

Ductile iron pipes, fittings, accessories and their joints for water applications — Technical Corrigendum 1

Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement — Amendment 1: Measurement uncertainty

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps and mixing valves

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances — Amendment 1

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances

Measurement of water flow in closed conduits — Meters for cold potable water — Part 1: Specification

Measurement of water flow in closed conduits — Meters for cold potable water — Part 1: Specifications

Measurement of water flow in fully charged closed conduits — Meters for cold potable water and hot water — Part 1: Specifications

Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements

Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements

Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements

Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements — Addendum 1: Parallel and multiple meter operation

Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements and selection

Measurement of water flow in fully charged closed conduits — Meters for cold potable water and hot water — Part 2: Installation requirements

Water meters for cold potable water and hot water — Part 2: Test methods

Water meters for cold potable water and hot water — Part 2: Test methods

Measurement of water flow in closed conduits — Meters for cold potable water — Part 3: Test methods and equipment

Measurement of water flow in closed conduits — Meters for cold potable water — Part 3: Test methods and equipment

Measurement of water flow in fully charged closed conduits — Meters for cold potable water and hot water — Part 3: Test methods and equipment

Water meters for cold potable water and hot water — Part 3: Test report format

Water meters for cold potable water and hot water — Part 3: Test report format

Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1

Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1

Water meters for cold potable water and hot water — Part 5: Installation requirements

Water meters for cold potable water and hot water — Part 5: Installation requirements

Unplasticized polyvinyl chloride (PVC-U) pipes for water supply — Recommended practice for laying

Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation

Water aggressiveness evaluation and optimized lining choice

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 1: General

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 2: Pipes (with or without integral sockets)

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 3: Fittings and joints

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 4: Valves and ancillary equipment

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 5: Fitness for purpose of the system

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Amendment 1

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Technical Corrigendum 1

Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes — Amendment 1

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes — Amendment 1

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system

Polyethylene (PE) pipes for water supply — Specifications

Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials

Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials

Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials

Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials

Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials

Ductile iron pipes — Centrifugal cement mortar lining — Composition controls of freshly applied mortar

Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply — Extractability of cadmium and mercury occurring as impurities

Predominantly key-operated cast iron gate valves for underground use

Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 1: Specifications

Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 1: Specifications

Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 2: Installation requirements

Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 2: Installation requirements

Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 3: Test methods

Plastics pipes for the transport of water intended for human consumption — Extractability of constituents — Test method

Plastics piping systems for the conveyance of water intended for human consumption — Migration assessment — Determination of migration values for plastics pipes

Plastics piping systems for the transport of water intended for human consumption — Migration assessment — Determination of migration values of plastics pipes and fittings and their joints

Rubber seals — Joint rings for hot water supply pipelines up to 110 degrees C — Specification for the material

Ductile iron pipelines — Rubber sealing rings for pipelines carrying potable water

Measurement of water flow in closed conduits — Meters for hot water — Part 1: Specifications

Thermoplastics pipes and fittings for hot and cold water systems

Plastics piping systems for hot and cold water installations — Guidance for classification and design

Plastics piping systems for hot and cold water installations — Guidance for classification and design — Amendment 1

Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1

Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing

Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing

Plastics piping systems — Pressure systems for hot and cold water — Test method for leaktightness under vacuum

Plastics piping systems — Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes — Test method for leaktightness under negative pressure

Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes — Test method for leaktightness under negative pressure, angular deflection and deformation

Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes — Test method for leaktightness under internal pressure and with angular deflection

Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection

Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General — Amendment 1

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General — Amendment 1: Impact test

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 2: Impact test

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 1

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 2

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system — Amendment 1

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General — Amendment 1

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 1

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 2

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 1

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 2

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Amendment 1

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Technical Corrigendum 1

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity

Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General

Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General — Amendment 1

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General

Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes

Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes — Amendment 1

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes — Amendment 1

Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 1

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 2

Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 5: Fitness for purpose of the system

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system — Amendment 1

Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 7: Guidance for the assessment of conformity

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 7: Guidance for the assessment of conformity

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General — Amendment 1

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 1

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 2

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 1

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 2

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 1

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 2

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 1: General

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 2: Pipes

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 3: Fittings

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 5: Fitness for purpose of the system

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications

Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement

Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General

Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes

Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes — Amendment 1

Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings

Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings — Amendment 1

Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system

Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity

Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity — Amendment 1

Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity

Life cycle analysis and recycling of ductile iron pipes for water applications

Input/output protocols and electronic interfaces for water meters — Requirements

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes — Amendment 1

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 1

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 2

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system — Amendment 1

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity

Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers

Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers

Service activities relating to drinking water supply systems and wastewater systems — Crisis management — Good practice for technical aspects

Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques

Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes