Surface treatment and coating, смотри 25.220
Фильтр :
Стандарт и/или проект Этап ТК
Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions
60.60 ISO/TC 156
Austenitic stainless steels — Determination of resistance to intergranular corrosion — Part 1: Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
95.99 ISO/TC 17/SC 7
Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
90.93 ISO/TC 156
Austenitic stainless steels — Determination of resistance to intergranular corrosion — Part 2: Corrosion test in a sulphuric acid/copper sulphate medium in the presence of copper turnings (Monypenny Strauss test)
95.99 ISO/TC 17/SC 7
Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
90.93 ISO/TC 156
Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels
90.60 ISO/TC 156
Corrosion of Metals and Alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel
50.20 ISO/TC 156
Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
60.60 ISO/TC 156
Corrosion of Metals and Alloys — Measurement of the Electrochemical Critical Localized Corrosion potential (E-CLCP) for Ti Alloys Fabricated via Additive Manufacturing Method in Simulated Biomedical Solutions
40.20 ISO/TC 156
Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures
60.00 ISO/TC 156
Corrosion of metals and alloys — Electrochemical test methods — Guideline for electrochemical measurements in high-temperature molten salts
50.00 ISO/TC 156
Corrosion of metals and alloys — Corrosion test method for disinfectant — Total immersion method
60.00 ISO/TC 156
Corrosion of metals and alloys — Guidelines for corrosion testing in simulated environment of deep-sea water
40.20 ISO/TC 156
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method
90.93 ISO/TC 156
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria
90.93 ISO/TC 156
Corrosion of metals and alloys — Determination of dezincification resistance of brass
95.99 ISO/TC 156
Copper alloys — Ammonia test for stress corrosion resistance
90.93 ISO/TC 26
The wiping method for measurements of gases and particles on real structures and equipment
30.60 ISO/TC 156
Corrosion tests in artificial atmosphere — General requirements
90.93 ISO/TC 156
Corrosion of metals and alloys — Determination of bimetallic corrosion in outdoor exposure corrosion tests
95.99 ISO/TC 156
Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests
90.93 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
95.99 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
90.93 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens
90.93 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens
90.93 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 4: Preparation and use of uniaxially loaded tension specimens
90.93 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 5: Preparation and use of C-ring specimens
90.93 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens
95.99 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
95.99 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
95.99 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
60.60 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 7: Slow strain rate testing
95.99 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 7: Method for slow strain rate testing
90.93 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 8: Preparation and use of specimens to evaluate weldments
90.93 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
95.99 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
60.60 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
95.99 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
60.60 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
90.93 ISO/TC 156
Corrosion of metals and alloys — Stress corrosion testing — Part 12: Requirements for atmospheric stress corrosion cracking testing
40.60 ISO/TC 156
Corrosion of metals and alloys — Overview of metal corrosion protection when using disinfectants
60.60 ISO/TC 156
Corrosion of metals and alloys — Terms and definitions
95.99 ISO/TC 156
Corrosion of metals and alloys — Vocabulary
95.99 ISO/TC 156
Corrosion of metals and alloys — Vocabulary — Amendment 1
95.99 ISO/TC 156
Corrosion of metals and alloys — Basic terms and definitions
95.99 ISO/TC 156
Corrosion of metals and alloys — Basic terms and definitions
95.99 ISO/TC 156
Corrosion of metals and alloys — Vocabulary
90.92 ISO/TC 156
Corrosion of metals and alloys — Vocabulary
10.99 ISO/TC 156
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
95.99 ISO/TC 156
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
95.99 ISO/TC 156
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
60.60 ISO/TC 156
Metals and alloys — Atmospheric corrosion testing — General requirements for field tests
95.99 ISO/TC 156
Metals and alloys — Atmospheric corrosion testing — General requirements
90.93 ISO/TC 156
Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Chart method
95.99 ISO/TC 79/SC 2
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method
95.99 ISO/TC 79/SC 2
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method
60.60 ISO/TC 79/SC 2
Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Grid method
95.99 ISO/TC 79/SC 2
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method
95.99 ISO/TC 79/SC 2
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method
60.60 ISO/TC 79/SC 2
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification
95.99 ISO/TC 156
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
90.93 ISO/TC 156
Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
95.99 ISO/TC 156
Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
90.93 ISO/TC 156
Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of pollution
95.99 ISO/TC 156
Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
90.93 ISO/TC 156
Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
95.99 ISO/TC 156
Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
90.93 ISO/TC 156
Corrosion tests in artificial atmospheres — Salt spray tests
95.99 ISO/TC 156
Corrosion tests in artificial atmospheres — Salt spray tests
95.99 ISO/TC 156
Corrosion tests in artificial atmospheres — Salt spray tests
95.99 ISO/TC 156
Corrosion tests in artificial atmospheres — Salt spray tests
95.99 ISO/TC 156
Corrosion tests in artificial atmospheres — Salt spray tests
60.60 ISO/TC 156
Nickel-based alloys — Determination of resistance to intergranular corrosion
90.93 ISO/TC 156
Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
95.99 ISO/TC 156
Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
90.93 ISO/TC 156
Corrosion of metals and alloys- Corrosion test method for disinfectant-Spray test method
30.60 ISO/TC 156
Corrosion of metals and alloys-Performance test method for corrosion inhibitors of industry equipment chemical cleaning
30.60 ISO/TC 156
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
95.99 ISO/TC 156
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
95.99 ISO/TC 156
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
60.60 ISO/TC 156
Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
95.99 ISO/TC 156
Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors — Technical Corrigendum 1
95.99 ISO/TC 156
Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
60.60 ISO/TC 156
Corrosion of metals and alloys — Alternate immersion test in salt solution
95.99 ISO/TC 156
Corrosion of metals and alloys — Alternate immersion test in salt solution
95.99 ISO/TC 156
Corrosion of metals and alloys — Alternate immersion test in salt solution
90.20 ISO/TC 156
Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion
90.92 ISO/TC 156
Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion
30.99 ISO/TC 156
Corrosion of metals and alloys — Guidelines for exposing and evaluating metals and alloys in surface sea water
90.93 ISO/TC 156
Corrosion of metals and alloys — Evaluation of pitting corrosion
95.99 ISO/TC 156
Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
60.60 ISO/TC 156
Corrosion of metals and alloys — Corrosion tests in artificial atmosphere — Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
90.93 ISO/TC 156
Corrosion of metals and alloys — Corrosion fatigue testing — Part 1: Cycles to failure testing
90.93 ISO/TC 156
Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens
90.93 ISO/TC 156
Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens — Amendment 1
10.99 ISO/TC 156
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity
95.99 ISO/TC 156
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity
60.60 ISO/TC 156
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres
95.99 ISO/TC 156
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres
60.60 ISO/TC 156
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
95.99 ISO/TC 156
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
60.60 ISO/TC 156
Corrosion of metals and alloys — General principles for corrosion testing
95.99 ISO/TC 156
Corrosion of metals and alloys — General principles for corrosion testing
60.60 ISO/TC 156
Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
90.93 ISO/TC 156
Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys
90.93 ISO/TC 156
Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1
60.60 ISO/TC 156
General principles of cathodic protection in sea water
95.99 ISO/TC 156
General principles of cathodic protection in seawater
90.20 ISO/TC 156
Cathodic protection of steel in concrete
95.99 ISO/TC 156
Cathodic protection of steel in concrete
95.99 ISO/TC 156
Cathodic protection of steel in concrete
60.60 ISO/TC 156
Corrosion of metals and alloys — Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
90.93 ISO/TC 156
Cathodic protection of harbour installations
90.93 ISO/TC 156
Corrosion of metals and alloys — Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
90.93 ISO/TC 156
Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data
90.20 ISO/TC 156
Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions
95.99 ISO/TC 156
Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
60.60 ISO/TC 156
Corrosion of metals and alloys — Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
90.93 ISO/TC 156
Cathodic protection — Competence levels of cathodic protection persons — Basis for a certification scheme
90.93 ISO/TC 156
Corrosion of metals and alloys — Evaluation of stress corrosion cracking by the drop evaporation test
90.93 ISO/TC 156
Corrosion of metals and alloys — Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
90.93 ISO/TC 156
Corrosion of metals and alloys — Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
95.99 ISO/TC 156
Corrosion of metals and alloys — Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
60.60 ISO/TC 156
Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
90.92 ISO/TC 156
Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
30.99 ISO/TC 156
Corrosion of metals and alloys — Test method for corrosion of materials by electrochemical impedance measurements
60.60 ISO/TC 156
Corrosion of metals and alloys — Corrosion tests in artificial atmospheres — Guidelines for selection of accelerated corrosion test for product qualification
60.60 ISO/TC 156
Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — "Dry" and "wet" conditions at constant absolute humidity
90.93 ISO/TC 156
Corrosion of metals and alloys — Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
90.93 ISO/TC 156
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
95.99 ISO/TC 156
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
90.92 ISO/TC 156
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
30.60 ISO/TC 156
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
90.92 ISO/TC 156
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
90.92 ISO/TC 156
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
95.99 ISO/TC 156
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
90.93 ISO/TC 156
Corrosion of metals and alloys — Guidelines for corrosion test by electrochemical noise measurements
90.93 ISO/TC 156
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
90.93 ISO/TC 156
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
90.93 ISO/TC 156
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
90.93 ISO/TC 156
Corrosion of metals and alloys — Conventions applicable to electrochemical measurements in corrosion testing
90.93 ISO/TC 156
Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
90.93 ISO/TC 156
Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements — Technical Corrigendum 1
60.60 ISO/TC 156
Corrosion of metals and alloys — Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
90.60 ISO/TC 156
Corrosion of metals and alloys — Determination of the critical pitting temperature under potientiostatic control
90.93 ISO/TC 156
Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
90.93 ISO/TC 156
Corrosion of metals and alloys — Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
90.93 ISO/TC 156
Corrosion of metals and alloys — Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
90.93 ISO/TC 156
Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria
95.99 ISO/TC 156
Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria
60.60 ISO/TC 156
Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
90.93 ISO/TC 156
Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 1: Application in concrete
60.60 ISO/TC 156
Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 2: Application in soils and natural waters
60.60 ISO/TC 156
Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
90.60 ISO/TC 156
Corrosion of metals and alloys — Corrosivity of atmospheres — Mapping areas of increased risk of corrosion
40.20 ISO/TC 156
Corrosion of metal and alloys — Determination of resistance of magnesium alloys to stress corrosion cracking
60.60 ISO/TC 156
Corrosion of metals and alloys — Determination of the corrosion rates of embedded steel reinforcement in concrete exposed to simulated marine environments
60.60 ISO/TC 156
Corrosion of metals and alloys — Measurement of environmentally assisted small crack growth rate
60.60 ISO/TC 156
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
95.99 ISO/TC 156
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying — Technical Corrigendum 1
95.99 ISO/TC 156
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
90.92 ISO/TC 156
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
30.60 ISO/TC 156
Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service
90.93 ISO/TC 156
Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
90.93 ISO/TC 156
Corrosion of metals and alloys — Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
90.93 ISO/TC 156
Ductile iron pipes, fittings, accessories and valves — External coatings of Ductile Iron Pipeline Systems — Aggressiveness assessment, requirements and field of use
20.98 ISO/TC 5/SC 2
Corrosion of metals and alloys — Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel
60.60 ISO/TC 156
Assessment of the effectiveness of cathodic protection based on coupon measurements
60.60 ISO/TC 156
Corrosion of metals and alloys — Sulfur dioxide test in a humid atmosphere (fixed gas method)
60.60 ISO/TC 156
Corrosion of metals and alloys — Test method for measuring the stress corrosion crack growth rate of steels and alloys under static-load conditions in high-temperature water
60.60 ISO/TC 156
Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
60.60 ISO/TC 156
Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method
60.60 ISO/TC 156
Corrosion control engineering life cycle — General requirements
60.60 ISO/TC 156/SC 1
Pipeline corrosion control engineering life cycle — General requirements
60.60 ISO/TC 156/SC 1
Corrosion control engineering life cycle — Risk assessment
60.60 ISO/TC 156/SC 1
Corrosion of metals and alloys — Guidelines for the corrosion testing of metals and alloys exposed in deep-sea water
60.60 ISO/TC 156
Corrosion of metals and alloys — Multielectrode arrays for corrosion measurement
60.60 ISO/TC 156
Corrosion of metals and alloys — Requirements for localised corrosion and environmentally assisted cracking testing of additively manufactured metals and alloys
60.60 ISO/TC 156
Corrosion of metals and alloys — Rating method by appearance of rust and stains of atmospheric corrosion for stainless steels
60.60 ISO/TC 156
Corrosion of metals and alloys — Standard test method for particle-free erosion corrosion of metallic materials by jet-in-slit
60.60 ISO/TC 156
Corrosion control engineering life cycle in fossil fuel power plants — General requirements
60.60 ISO/TC 156/SC 1
Cathodic protection of offshore wind structures
60.60 ISO/TC 156
Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments
90.92 ISO/TC 156

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.