Reference number
ISO 5628:2019
© ISO 2024
International Standard
ISO 5628:2019
Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
Edition 3
2019-05
Preview
Indisponible en français
Publiée (Edition 3, 2019)
Cette publication a été révisée et confirmée pour la dernière fois en 2024. Cette édition reste donc d’actualité.

ISO 5628:2019

Langue
Format
CHF 63
Convertir les francs suisses (CHF) dans une autre devise

Résumé

This document specifies three test methods for determining the bending stiffness of paper and paperboard. The test methods differ in the type of loading mode, thus giving rise to the two-point, three-point and four-point bending test methods.

For paper and paperboard in a low thickness range, the two-point bending method and the three-point bending method are suitable.

For corrugated fibreboard and board with a higher thickness, the four-point bending method is recommended.

The measurement conditions are defined in such a way that the test piece is not subjected to any significant permanent deformation during the test, nor is the range of validity of the formulae for calculating the bending stiffness exceeded.

In these bending tests, the test pieces of paper and board are regarded as "beams" as defined by the science of the strength of materials, see Reference [2].

Informations générales

  • État actuel
     : Publiée
    Date de publication
     : 2019-05
    Stade
    : Norme internationale confirmée [90.93]
  • Edition
     : 3
  • Comité technique :
    ISO/TC 6/SC 2
    ICS :
    85.060 
  • RSS mises à jour

Cycle de vie

Vous avez une question?

Consulter notre Aide et assistance

  2. Store
  3. Catalogue de normes
  4. TC
  5. ISO/TC 6/SC 2
  6. ISO 5628:2019