Filtrar :
Norma o proyecto | Etapa | TC |
---|---|---|
Rubber hose for grit blasting
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses for sand and grit blasting — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses for sand and grit blasting — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and hose assemblies for sand and grit blasting — Specification
|
60.60 | ISO/TC 45/SC 1 |
Paints and varnishes — Terms and definitions for coating materials — Part 3: Surface preparation and methods of application
|
95.99 | ISO/TC 35 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings — Supplement: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
30.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections
|
40.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, cut edges and other areas with surface imperfections
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections
|
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 1: Field test for soluble iron corrosion products
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces
|
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
|
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
|
40.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of soluble contaminants for analysis — The Bresle method
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of soluble contaminants for analysis — The Bresle method
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of water soluble contaminants for analysis (Bresle method)
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 8: Field method for the refractometric determination of moisture
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 10: Field method for the titrimetric determination of water-soluble chloride
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 11: Field method for the turbidimetric determination of water-soluble sulfate
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 12: Field method for the titrimetric determination of water-soluble ferrous ions
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 15: Extraction of soluble contaminants for analysis by acid extraction
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles
|
90.20 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning
|
90.20 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 3: Hand- and power-tool cleaning
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 3: Hand- and power-tool cleaning
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 4: Acid pickling
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 5: Water jet cleaning
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 1: General introduction and classification
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 1: General introduction and classification
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 2: Chilled-iron grit
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 2: Chilled-iron grit
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 3: High-carbon cast-steel shot and grit
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 3: High-carbon cast-steel shot and grit
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 4: Low-carbon cast-steel shot
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 4: Low-carbon cast-steel shot
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 5: Cut steel wire
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 6: Stainless steel (shot and irregulars)
|
40.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 7: High chromium white cast iron grit
|
40.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 3: Determination of hardness
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 3: Determination of hardness
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 4: Determination of apparent density
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 4: Determination of apparent density
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 5: Determination of percentage defective particles and of microstructure
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 5: Determination of percentage defective particles and of microstructure
|
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 5: Determination of percentage defective particles and of microstructure
|
40.20 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 6: Determination of foreign matter
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 6: Determination of foreign matter
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 7: Determination of moisture
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 7: Determination of moisture
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 9: Wear testing and performance
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification — Technical Corrigendum 1
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification — Technical Corrigendum 2
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification
|
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification
|
40.20 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 3: Copper refinery slag
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 3: Copper refinery slag
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 4: Coal furnace slag
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 4: Coal furnace slag
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Nickel refinery slag
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Nickel slag
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 6: Iron furnace slag
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 6: Iron and steel slags
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 7: Fused aluminium oxide
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 7: Fused aluminium oxide — Technical Corrigendum 1
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 7: Fused aluminium oxide
|
90.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 8: Olivine sand
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 8: Olivine
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 9: Staurolite
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet
|
90.92 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet
|
40.00 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 11: Volcanic lava
|
50.20 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 3: Determination of apparent density
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 3: Determination of apparent density
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 3: Determination of apparent density
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Determination of moisture
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Determination of moisture
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Determination of moisture
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Determination of water-soluble chlorides
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Determination of water-soluble chlorides
|
95.99 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Determination of water-soluble chlorides
|
60.60 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 8: Field determination of water-soluble chlorides
|
60.60 | ISO/TC 35/SC 12 |
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation
|
95.99 | ISO/TC 35/SC 14 |
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation
|
90.93 | ISO/TC 35/SC 14 |
Preparation of steel substrates before application of paints and related products — Collected information on the effect of levels of water-soluble salt contamination
|
90.93 | ISO/TC 35/SC 12 |
Preparation of steel substrates before application of paints and related products — Analytical colorimetry method to support visual assessment of surface preparation grades
|
60.60 | ISO/TC 35/SC 12 |
Foundry machinery — Vocabulary — Part 4: Abrasive blasting machines and other equipment related to cleaning and finishing for casting
|
60.60 | ISO/TC 306 |
No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.